BS EN 419251-3-2013
raising standards worldwide™NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 419251-3:2013Security requirements for device for authenticationPart 3: Additional functionality for security targetsLicensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 419251-3:2013. The UK participation in its preparation was entrusted to T e c h n i c a l Committee IST/17, Cards and personal identification.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.© The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 74078 7 ICS 35.240.15 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate T e x t a f f e c t e dLicensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 419251-3 March 2013 ICS 35.240.15 English Version Security requirements for device for authentication - Part 3: Additional functionality for security targets Profils de protection pour dispositif d authentification - Partie 3: Fonctionnalités additionnelles Sicherheitsanforderungen für Geräte zur Authentisierung - Teil 3: Zusätzliche Funktionalitäten für Sicherheitsziele This European Standard was approved by CEN on 7 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 419251-3:2013: ELicensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 2 Contents Page Foreword . 5 1 Scope 6 2 Normative references . 6 3 Conformance 6 3.1 CC Conformance Claim . 6 3.2 PP Claim . 6 3.3 Package Claim 6 3.4 Conformance Rationale . 6 3.5 Conformance Statement 7 4 Terms and definitions 7 5 Symbols and abbreviations . 9 6 Overview of the target of evaluation . 9 6.1 TOE Type 9 6.2 TOE Usage 9 6.3 Security Features of the TOE . 10 6.4 Required non-TOE Hardware and Software 10 6.5 Protection Profile Usage 10 6.6 Groups 10 6.6.1 General . 10 6.6.2 Main groups 10 6.6.3 Environment groups 11 6.7 Configurations 13 6.7.1 General . 13 6.7.2 Rules . 13 6.7.3 Possible Configurations 14 6.8 TOE Environment . 15 6.8.1 Overall view 15 6.8.2 Personalisation application . 16 6.8.3 Administration application 17 6.8.4 Authentication application . 18 6.8.5 Verifier 19 6.8.6 Key Generator 19 6.8.7 Certification Authority 20 6.8.8 Examples of applications. 20 6.9 Life Cycle 22 6.9.1 Overview . 22 6.9.2 Pre-Personalisation phase . 23 6.9.3 Personalisation phase . 23 6.9.4 Usage phase . 24 7 Security problem definition . 26 7.1 Assets . 26 7.1.1 General . 26 7.1.2 Core group 26 7.1.3 KeyGen group 26 7.1.4 Admin group . 27 7.2 Users . 27 7.2.1 Core group 27 7.2.2 KeyImp group . 28 Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 3 7.2.3 KeyGen group 28 7.2.4 Admin group . 28 7.3 Threats 28 7.3.1 General . 28 7.3.2 Core group 29 7.3.3 KeyGen group 30 7.3.4 Admin group . 30 7.4 Organisational security policies 30 7.4.1 Core group 30 7.4.2 KeyGen group 31 7.4.3 Admin group . 31 7.5 Assumptions 31 7.5.1 Core group 31 7.5.2 KeyGen group 32 7.5.3 Admin group . 32 8 Security objectives . 32 8.1 General − Transfer of sensitive data . 32 8.2 Security objectives for the TOE . 33 8.2.1 Core group 33 8.2.2 KeyImp group . 34 8.2.3 KeyGen group 34 8.2.4 Admin group . 34 8.2.5 Untrusted PersoAppli . 35 8.2.6 Untrusted AuthAppli 35 8.2.7 Untrusted Verifier . 35 8.2.8 Untrusted CA 35 8.2.9 Untrusted AdminAppli 35 8.3 Security objectives for the operational environment 36 8.3.1 Core group 36 8.3.2 KeyImp group . 36 8.3.3 Admin group . 37 8.3.4 Trusted PersoAppli 37 8.3.5 Trusted AuthAppli 37 8.3.6 Trusted Verifier . 37 8.3.7 Trusted CA 37 8.3.8 Trusted AdminAppli . 37 8.4 Rationale for Security objectives . 38 9 Extended component definition – Definition of the Family FCS_RNG . 43 10 Security requirements 43 10.1 General . 43 10.2 Introduction 44 10.2.1 Subjects Objects and security attributes 44 10.2.2 Operations 45 10.3 Security functional requirements 46 10.3.1 General . 46 10.3.2 Core group 47 10.3.3 KeyImp group . 55 10.3.4 KeyGen group 58 10.3.5 Admin group . 61 10.3.6 Untrusted PersoAppli . 65 10.3.7 Untrusted AuthAppli 66 10.3.8 Untrusted Verifier . 66 10.3.9 Untrusted CA 67 10.3.10 Untrusted AdminAppli 68 10.4 Security assurance requirements 68 10.5 SFR / Security objectives . 69 10.6 SFR Dependencies . 74 10.7 Rationale for the Assurance Requirements 76 Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 4 Bibliography 78 Index 79 Figures Figure 1 — TOE Security Features . 15 Figure 2 — Personalisation application environment . 16 Figure 3 — Administration application environment . 17 Figure 4 — Authentication application environment . 18 Figure 5 — TOE Life Cycle . 22 Tables Table 1 — Basic configurations . 14 Table 2 — IdTrusted configurations 14 Table 3 — Protection of sensitive data 33 Table 4 — Security objectives vs problem definition rationale 38 Table 5 — Security attributes 45 Table 6 — Core security attributes 50 Table 7 — Core operations . 50 Table 8 — Core security attributes − Operation . 51 Table 9 — Core security attributes - initial value 52 Table 10 — Core security attributes – Updates . 53 Table 11 — TSF data – updates . 53 Table 12 — KeyImp security attributes 55 Table 13 — KeyImp security attributes - operations . 56 Table 14 — KeyImp security attributes – update authorised roles 57 Table 15 — KeyImp security attributes – update values 58 Table 16 — KeyGen operations 59 Table 17 — KeyGen security attributes . 59 Table 18 — KeyGen operation rules . 60 Table 19 — KeyGen security attributes – update authorised roles . 60 Table 20 — KeyGen security attributes – initial values 61 Table 21 — KeyGen security attributes – update values 61 Table 22 — Admin security attributes – update authorised roles 64 Table 23 — Admin security attributes – initial values . 64 Table 24 — Admin security attributes – update values 64 Table 25 — Admin TSF data – operations . 65 Table 26 — SFR vs Security objectives retionale 69 Table 27 — SFR dependencies 74 Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 5 Foreword This document (EN 419251-3:2013) has been prepared by Technical Committee CEN/TC 224 “Personal identification, electronic signature and cards and their related systems and operations”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 419251 contains the following parts: EN 419251-1, Security requirements for device for authentication — Part 1: Protection profile for core functionality; EN 419251-2, Security requirements for device for authentication — Part 2: Protection profile for extension for trusted channel to certificate generation application; EN 419251-3, Security requirements for device for authentication — Part 3: Additional functionality for security targets (the present document). The present document was submitted to the Enquiry under the reference prEN 16248-3. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 6 1 Scope This European Standard contains packages that define security requirements for an authentication device. This document is Part 3. Part 1 and Part 2 are Protections Profiles – PP– based on the packages defined in this document. Packages contained in this document can be added in a Security Target –ST- claiming PP of Part 1 or Part 2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 10181-2:1996, Information technology — Open Systems Interconnection — Security frameworks for open systems: Authentication framework ISO/IEC 15408-1:20091), Information technology — Security techniques — Evaluation criteria for IT security — Part 1: Introduction and general model ISO/IEC 15408-21), Information technology — Security techniques — Evaluation criteria for IT security — Part 2: Security functional components ISO/IEC 15408-31), Information technology — Security techniques — Evaluation criteria for IT security — Part 3: Security assurance components ISO/IEC 18045, Information technology — Security techniques — Methodology for IT security evaluation 3 Conformance 3.1 CC Conformance Claim These packages are CC Part 2 extended and CC Part 3 conformant and written according to ISO/IEC 15408-1, -2, -3 and ISO/IEC 18045. 3.2 PP Claim These packages do not claim conformance to any other Protection Profile. 3.3 Package Claim The evaluation assurance level for these packages is EAL4-augmented with the assurance components AVA_VAN.5 and ALC_DVS.2. 3.4 Conformance Rationale Since these packages do not claim conformance to any other protection profile, no rationale is necessary here. 1) ISO/IEC 15408-1, -2 and -3 respectively correspond to Common Criteria for Information Technology Security Evaluation, Parts 1, 2 and 3. Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 7 3.5 Conformance Statement The conformance required by these packages is the demonstrable-PP conformance. This would facilitate conformance claim to both the PP “Authentication device” and other PPs for Security Target (ST) authors. 4 Terms and definitions For the purposes of this document, the following terms and definitions apply. 4.1 Administrator person who is allowed administration operations on the authentication device Note 1 to entry: See 7.2 for more details. 4.2 Authentication Protocol sensitive data data used in the process of authentication of the TOE by the external entity Note 1 to entry: These data are linked to the Authentication private key, e.g. Authentication Certificate or APuK. Note 2 to entry: Authentication Protocol sensitive data may be empty if the environment is trusted, and the holder public key known to the system. 4.3 Certificate attestation, which links the APuK to a person and confirms the identity of that person (as defined in the Directive [8], article 2, Clause 9) 4.4 Certificate Info information associated with an Authentication key pair that consists either: a signer s public key certificate; or one or more hash values of a signer s public key certificate together the identifier of the hash function used to compute these hash values, and some information which allows the signer to disambiguate between several signers certificates 4.5 Configuration set of groups Note 1 to entry: Each configuration corresponds to one PP. It has its own rationale. See the rest of the document. 4.6 Group set Assets, threats, objectives, and Requirements, addressing a specific function Note 1 to entry: See the rest of the document. 4.7 Holder legitimate holder of the authentication device Note 1 to entry: See 7.2 for more details. Licensed Copy: Mr. Universiti Teknologi Malaysia User, Universiti Teknologi Malaysia, 02/08/2013 06:48, Uncontrolled Copy, (c) The British Standards Institution 2013BS EN 419251-3:2013EN 419251-3:2013 (E) 8 4.8 Issuer user of the authentication device during personalisation Note 1 to entry: See 7.2 for more details. 4.9 Protection Profile PP implementation-independent statement of security needs for a TOE [SOURCE: ISO/IEC 15408-1:200