欢迎来到标准图书馆! | 帮助中心 Day Day UP!
标准图书馆
首页 标准图书馆 > 资源分类 > PDF文档下载

ASTM A167 - 99.pdf

  • 资源大小:14.46KB        全文页数:2页
  • 资源格式: PDF        下载权限:游客/注册会员/VIP会员    下载费用:20Gold 【人民币20元】
游客快捷下载 游客一键下载
会员登录下载
下载资源需要20Gold 【人民币20元】Paypal charge shall be login

邮箱/手机号:
您支付成功后,系统会自动为您创建此邮箱/手机号的账号,密码跟您输入的邮箱/手机号一致,以方便您下次登录下载和查看订单。注:支付完成后需要自己下载文件,并不会自动发送文件哦!

支付方式: 微信支付    支付宝   
验证码:   换一换

友情提示
2、本站资源不支持迅雷下载,请使用浏览器直接下载(不支持QQ浏览器)
3、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰   

ASTM A167 - 99.pdf

Designation A 167 – 99Standard Specification forStainless and Heat-Resisting Chromium-Nickel Steel Plate,Sheet, and Strip1This standard is issued under the fixed designation A 167; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon e indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1. Scope1.1 This specification covers stainless and heat-resistingchromium-nickel steel plate, sheet, and strip.1.2 The values stated in inch-pound units are to be regardedas the standard.NOTE 1Grades that were previously covered in both SpecificationsA 167 and A 240/A 240M have been removed from this specification andmay now be supplied and purchased in compliance with SpecificationA 240/A 240M. The chemical and mechanical property requirements ofthese grades were identical in Specifications A 167 and A 240/A 240M atthe time of removal from Specification A 167.2. Referenced Documents2.1 ASTM StandardsA 240/A240M Specification for Heat-Resisting Chromiumand Chromium-Nickel Stainless Steel Plate, Sheet andStrip for Pressure Vessels2A 370 Test Methods and Definitions for Mechanical Testingof Steel Products2A 480/A480M Specification for General Requirements forFlat-Rolled Stainless and Heat-Resisting Steel Plate,Sheet, and Strip2E 527 Practice for Numbering Metals and Alloys UNS32.2 SAE StandardJ 1086 Numbering Metals and Alloys UNS43. Chemical Composition3.1 The steel shall conform to the requirements as tochemical composition specified in Table 1, and shall conformto applicable requirements specified in Specification A 480/A 480M.4. Mechanical Properties4.1 The material shall conform to the mechanical propertiesspecified in Table 2.5. General Requirements5.1 The following requirements for orders for materialfurnished under this specification shall conform to the appli-cable requirements of the current edition of SpecificationA 480/A 480M.5.1.1 Definitions,5.1.2 General requirements for delivery,5.1.3 Ordering information,5.1.4 Process,5.1.5 Heat treatment,5.1.6 Special tests,5.1.7 Dimensions and permissible variations,5.1.8 Workmanship, finish and appearance,5.1.9 Number of tests,5.1.10 Specimen preparation,5.1.11 Retreatment,5.1.12 Inspection,5.1.13 Rejection and rehearing,5.1.14 Material test report,5.1.15 Certification, and5.1.16 Packaging, marking, and loading.1This specification is under the jurisdiction of ASTM Committee A-1 on Steel,Stainless Steel and Related Alloysand is the direct responsibility of SubcommitteeA01.17 on Flat Stainless Steel Products.Current edition approved Sept. 10, 1999. Published November 1999. Originallypublished as A 167 – 35 T. Last previous edition A 167 – 96.2Annual Book of ASTM Standards, Vol 01.03.3Annual Book of ASTM Standards, Vol 01.01.4Available from Society of Automotive Engineers, 400 Commonwealth Drive,Warrendale, PA 15096.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.TABLE 1 Chemical RequirementsAComposition, UNSDesig-nationBType Car-bonMan-ganesePhos-pho-rusSulfur Silicon Chromium Nickel Molyb-denumOther ElementsS30215 302B 0.15 2.00 0.045 0.030 2.00–3.00 17.0–19.0 8.00–10.0 . . . N 0.10S30800 308 0.08 2.00 0.045 0.030 0.75 19.0–21.0 10.0–12.0 . . . . . .S30900 309 0.20 2.00 0.045 0.030 0.75 22.0–24.0 12.0–15.0 . . . . . .S31000 310 0.25 2.00 0.045 0.030 1.50 24.0–26.0 19.0–22.0 . . . . . .AMaximum unless range or minimum is indicated.BNew designation established in accordance with Practice E 527 and SAE J 1086.TABLE 2 Mechanical Property RequirementsUNSDesignationATypeTensile Strength, min Yield Strength, minBElongationin 2 in. or50 mm,min, Hardness, maxCksi MPa ksi MPa Brinell Rockwell BS30215 302B 75 515 30 205 40.0 217 95S30800 308 75 515 30 205 40.0 183 88S30900 309 75 515 30 205 40.0 217 95S31000 310 75 515 30 205 40.0 217 95ANew designation established in accordance with Practice E 527 and SAE J 1086.BYield strength shall be determined by the offset method at 0.2 in accordance with Test Methods and Definitions A 370. Unless otherwise specified, an alternativemethod of determining yield strength may be based on a total extension under load of 0.5 .CEither Brinell or Rockwell B hardness is permissible.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 phone, 610-832-9555 fax, or serviceastm.org e-mail; or through the ASTM websitewww.astm.org.A167–992

注意事项

本文(ASTM A167 - 99.pdf)为本站会员(admin)主动上传,标准图书馆仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知标准图书馆(发送邮件至[email protected]或直接QQ联系客服),我们立即给予删除!

温馨提示:如果因为网速或其他原因下载失败请重新下载,重复下载不扣分。

关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

@copyright 2017-Stdlibrary All Rights Reserved.


收起
展开