欢迎来到标准图书馆! | 帮助中心 Day Day UP!
标准图书馆
首页 标准图书馆 > 资源分类 > PDF文档下载

ASTM A102 - 04 (2014).pdf

  • 资源大小:64.80KB        全文页数:3页
  • 资源格式: PDF        下载权限:游客/注册会员/VIP会员    下载费用:20Gold 【人民币20元】
游客快捷下载 游客一键下载
会员登录下载
下载资源需要20Gold 【人民币20元】Paypal charge shall be login

邮箱/手机号:
您支付成功后,系统会自动为您创建此邮箱/手机号的账号,密码跟您输入的邮箱/手机号一致,以方便您下次登录下载和查看订单。注:支付完成后需要自己下载文件,并不会自动发送文件哦!

支付方式: 微信支付    支付宝   
验证码:   换一换

友情提示
2、本站资源不支持迅雷下载,请使用浏览器直接下载(不支持QQ浏览器)
3、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰   

ASTM A102 - 04 (2014).pdf

Designation A102 − 04 Reapproved 2014Standard Specification forFerrovanadium1This standard is issued under the fixed designation A102; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers one grade of ferrovanadium.1.2 The values stated in inch-pound units are to be regardedas standard. The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.2. Referenced Documents2.1 ASTM Standards2A1025 Specification for Ferroalloys and Other AlloyingMaterials, General RequirementsE365 Test Method for the Determination of Vanadium inFerrovanadium and Vanadium Alloying Additives With-drawn 200533. General Conditions for Delivery3.1 Materials furnished to this specification shall conform tothe requirements of Specification A1025, including any supple-mentary requirements that are indicated in the purchase order.Failure to comply with the general requirements of Specifica-tion A1025 constitutes nonconformance with this specification.In case of conflict between the requirements of this specifica-tion and Specification A1025, this specification shall prevail.3.2 Although ferrovanadium is ordered by total net weight,the customary basis of payment is per pound of containedvanadium.4. Chemical Composition4.1 The material shall conform to the requirements as tochemical composition specified in Table 1.4.2 The manufacturer shall furnish an analysis of eachshipment showing the percentage of each element specified.5. Size5.1 The grade is available in sizes as listed in Table 2.NOTE 1The sizes listed in Table 2 are typical as shipped from themanufacturer’s plant. Ferrovanadium has a friability code number of “1”.It is a tough material, susceptible to little, if any, breakage during shipmentor handling.6. Chemical Analysis6.1 The chemical analysis of the material shall be made inaccordance with the procedure for ferrovanadium as describedin Test Methods E365 or alternative methods which will yieldequivalent results. For elements other than vanadium thechemical analysis shall be agreed upon by the purchaser andsupplier.6.2 If alternative methods of analysis are used, in case ofdiscrepancy, Test Methods E365 shall be used for referee.6.3 Where no method is given for the analysis for aparticular element, the analysis shall be made in accordancewith a procedure agreed upon by the manufacturer and thepurchaser.1This specification is under the jurisdiction of ASTM Committee A01 on Steel,Stainless Steel and Related Alloys and is the direct responsibility of SubcommitteeA01.18 on Castings.Current edition approved Oct. 1, 2014. Published October 2014. Originallyapproved in 1925. Last previous edition approved in 2009 as A102 – 042009.DOI 10.1520/A0102-04R14.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standard’s Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1SUPPLEMENTARY REQUIREMENTSThe composition shall be further limited to the requirements of Table S1.1 in addition to those inTable 1. An analysis of each lot is not required. The manufacturer shall supply, upon request, theresults of an analysis for these elements on a cumulative basis over a period mutually agreed upon bythe manufacturer and the purchaser.TABLE 1 Chemical RequirementsAElement Composition, Vanadium,B75-85Carbon, max 0.75Silicon, max 1.5Aluminum, max 2.0Sulfur, max 0.08Phosphorus, max 0.08AFor the purposes of determining conformance with this specification, the reportedanalysis shall be rounded to the nearest unit in the last right-hand place of figuresused in expressing the limiting value, in accordance with the rounding method ofPractice A1025.BFor the purposes of determining the vanadium content of any shipment,vanadium shall be reported to the nearest 0.1 , applying the same roundingprocedure as prescribed in Footnote A.TABLE 2 Sizing RequirementsSize Requirements2 in. 50 mm by down1 in. 25 mm by down1⁄2 in. 12.5 mm by downNo. 8 2.36 mm by downTABLE S1.1 Supplementary Chemical RequirementsElement Maximum LimitsAllowable, Chromium 0.50Copper 0.15Nickel 0.10Lead 0.020Tin 0.050Zinc 0.020Molybdenum 0.75Titanium 0.15Nitrogen 0.20A102 − 04 20142ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 phone, 610-832-9555 fax, or serviceastm.org e-mail; or through the ASTM websitewww.astm.org. Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel 978 646-2600; http//www.copyright.com/A102 − 04 20143

注意事项

本文(ASTM A102 - 04 (2014).pdf)为本站会员(admin)主动上传,标准图书馆仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知标准图书馆(发送邮件至[email protected]或直接QQ联系客服),我们立即给予删除!

温馨提示:如果因为网速或其他原因下载失败请重新下载,重复下载不扣分。

关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

@copyright 2017-Stdlibrary All Rights Reserved.


收起
展开