欢迎来到标准图书馆! | 帮助中心 Day Day UP!
标准图书馆
首页 标准图书馆 > 资源分类 > PDF文档下载

ASTM A1010 - A 1010M - 13.pdf

  • 资源大小:54.98KB        全文页数:3页
  • 资源格式: PDF        下载权限:游客/注册会员/VIP会员    下载费用:20Gold 【人民币20元】
游客快捷下载 游客一键下载
会员登录下载
下载资源需要20Gold 【人民币20元】Paypal charge shall be login

邮箱/手机号:
您支付成功后,系统会自动为您创建此邮箱/手机号的账号,密码跟您输入的邮箱/手机号一致,以方便您下次登录下载和查看订单。注:支付完成后需要自己下载文件,并不会自动发送文件哦!

支付方式: 微信支付    支付宝   
验证码:   换一换

友情提示
2、本站资源不支持迅雷下载,请使用浏览器直接下载(不支持QQ浏览器)
3、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰   

ASTM A1010 - A 1010M - 13.pdf

Designation A1010/A1010M − 13Standard Specification forHigher-Strength Martensitic Stainless Steel Plate, Sheet, andStrip1This standard is issued under the fixed designation A1010/A1010M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This specification covers martensitic stainless steels forvarious structural, architectural, pressure vessel, and heat-resisting applications. The mechanical properties of thesesteels are customarily, but not necessarily, developed by asuitable heat treatment generally referred to as tempering.1.2 Steel products under this specification are available intwo gradesGrade Yield Strength, min, ksi [MPa]40 [275] 40 [275]50 [345] 50 [345]1.3 The maximum thickness of plates is limited only by thecapacity of the composition to meet the specified mechanicalproperty requirements; however, current practice normallylimits the maximum thickness of plates furnished under thisspecification to 2 in. [50 mm].1.4 The values stated in either SI units or inch-pound unitsare to be regarded separately as standard. The values stated ineach system may not be exact equivalents; therefore, eachsystem shall be used independently of the other. Combiningvalues from the two systems may result in non-conformancewith the standard.2. Referenced Documents2.1 ASTM Standards2A480/A480M Specification for General Requirements forFlat-Rolled Stainless and Heat-Resisting Steel Plate,Sheet, and StripA673/A673M Specification for Sampling Procedure for Im-pact Testing of Structural SteelE527 Practice for Numbering Metals and Alloys in theUnified Numbering System UNS2.2 Other DocumentSAE J1086 Recommended Practice for Numbering Metalsand Alloys33. General Requirements3.1 The following requirements for orders for materialfurnished under this specification shall conform to the appli-cable requirements of the current edition of SpecificationA480/A480M.3.1.1 Terminology,3.1.2 Ordering Information,3.1.3 Process,3.1.4 Heat Analysis,3.1.5 Product Analysis,3.1.6 Finish for Sheet,3.1.7 Finish for Strip,3.1.8 Finish for Plates,3.1.9 Test Specimens,3.1.10 Number of Tests,3.1.11 Test Methods,3.1.12 Retests and Retreatment,3.1.13 Dimensions and Permissible Variations,3.1.14 Workmanship,3.1.15 Packaging, Marking, and Loading,3.1.16 Inspection,3.1.17 Rejection and Rehearing, and3.1.18 Material Test Report and Certification.4. Chemical Composition4.1 The steel shall conform to the requirements as tochemical composition specified in Table 1, and shall conformto applicable requirements specified in the current edition ofSpecification A480/A480M.5. Heat Treatment5.1 The material shall be heat-treated by tempering to meetthe requirements of this specification. The tempering tempera-ture shall not exceed 1400F [760C]. Prior to tempering, thesteel shall be in the as-rolled, normalized or quenched condi-tion.1This specification is under the jurisdiction of ASTM Committee A01 on Steel,Stainless Steel and Related Alloys and is the direct responsibility of SubcommitteeA01.17 on Flat-Rolled and Wrought Stainless Steel.Current edition approved Oct. 1, 2013. Published October 2013. Originallyapproved in 2000. Last previous edition approved in 2009 as A1010/A1010M – 012009. DOI 10.1520/A1010_A1010M-13.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standard’s Document Summary page onthe ASTM website.3Available from Society of Automotive Engineers SAE, 400 CommonwealthDr., Warrendale, PA 15096-0001, http//www.sae.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1Copyright by ASTM Intl all rights reserved;6. Mechanical Properties6.1 The material shall conform to the mechanical propertiesspecified in Table 2.7. Keywords7.1 architectural steel; martensitic; plate; stainless steel;steel; structural steel; temperedSUPPLEMENTARY REQUIREMENTSSupplementary requirements shall not apply unless specified on the purchase order. Requirementsother than those shown in this section may be specified subject to agreement between the supplier andthe purchaser. The following supplementary requirements are suitable for use with this specification.S1. Charpy V-Notch Impact TestS1.1 Charpy V-notch impact tests shall be conducted inaccordance with Specification A673/A673M.S1.2 The frequency of testing, the test temperature to beused, and the absorbed energy requirements shall be asspecified on the order.S2. Ultrasonic ExaminationS2.1 The material shall be ultrasonically examined in ac-cordance with the requirements specified on the order.SUMMARY OF CHANGESCommittee A01 has identified the location of selected changes to this standard since the last issueA1010/A1010M – 01R09 that may impact the use of this standard. Approved Oct. 1, 2013.1 Revised all references to 350 Mpa to 345 Mpa.2 Revised paragraph 1.3, changed normal maximum thick-ness from 1 in. [25 mm] to 2 in. [50 mm].3 Changed sulfur in Table 1 to 0 .010.4 Deleted hardness from the mechanical properties Table 2.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 phone, 610-832-9555 fax, or serviceastm.org e-mail; or through the ASTM websitewww.astm.org. Permission rights to photocopy the standard may also be secured from the ASTM website www.astm.org/COPYRIGHT/.TABLE 1 Chemical Composition Requirements, AUNSDesignationBType Carbon Manganese Phosphorus Sulfur Silicon Chromium Nickel Molybdenum Nitrogen OtherElementsS41003 . . . 0.030 1.50 0.040 0.010 1.00 10.5-12.5 1.50 . . . 0.030 . . .AMaximum, unless range or minimum is indicated.BDesignation established in accordance with Practice E527 and SAE J 1086.TABLE 2 Mechanical Test RequirementsGrade YieldStrength,min, ksi[MPa]TensileStrength,min, ksi[MPa]Elongation in2 in. [50 mm],min, Cold Blend40 40 [275] 66 [455] 18 not required50 50 [345] 70 [485] 18 not requiredA1010/A1010M − 132Copyright by ASTM Intl all rights reserved;

注意事项

本文(ASTM A1010 - A 1010M - 13.pdf)为本站会员(admin)主动上传,标准图书馆仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知标准图书馆(发送邮件至[email protected]或直接QQ联系客服),我们立即给予删除!

温馨提示:如果因为网速或其他原因下载失败请重新下载,重复下载不扣分。

关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

@copyright 2017-Stdlibrary All Rights Reserved.


收起
展开